Use on 5-piece rims 25" to 51"
with pry bar/bead loosening pockets.4-1/4" stroke, 13.8-ton ram
will break the toughest beads. Same as IMT-1800. 10207 kit contains 10100
bead breaker, 10500 pump and 10604 hose assembly. 10209 kit contains
10100 bead breaker, 10592 pump and 10604 hose assembly. Use with any air/hydraulic
pump.
10101 - "Combi"
Bead Breaker
Works on all single, two- and three-piece truck tires/rims,
including new style wheels. Breaks beads in seconds using 10,000 lbs.
of force. The "Combi" Bead Breaker will not work on five-piece
earth mover/giant wheel/rim - Model 10100 or 10105 required. Similar to
IMT-210 but has patented side straps which allow tool to be used on newer
high-flanged wheels. The 10200 kit contains 10101 bead breaker, 10500
pump and 10604 hose assembly. The 10202 kit contains 10101 bead breaker,
10592 pump and 10604 hose assembly.
10102 - "Maxi" Bead Breaker
Newly redesigned bead breaker, works on ALL 3 piece wheels that replace older 5 piece wheels. Designed to work on front or back of wheel with no attachments or accessories. Unit clamps easily to wheel – no setup time. Patent pending.
10103 - Giant
Tire / Earth Mover Bead Breaker
Use on all 39",
45", 51" and 63" wheel sizes. In most cases, you must first
use model 10105 or 10100 bead breaker to start the movement of the rim
flange. The 10103 can then be used. Model 10594 or 10504 air/hydraulic
pump recommended for operation. Replaces Goodyear TO-2000-HA. 10211 kit
contains 10103 bead breaker, 10504 pump and 10602 hose assembly. 10210
kit contains 10101 bead breaker, 10594 pump and 10602 hose assembly.
10104 - Giant
Tire / Earth Mover Bead Breaker
Use on 5-piece rims
25" - 51" without pry bar/bead loosening pockets. Replaces Goodyear
TO-100-HA. 10212 kit contains 10104 bead breaker, 10508 hand pump and
10604 hose assembly.
10105 - Earth
Mover Tire Bead Breaker
Use on smaller 25"
and 29" earth mover tires/wheels. 2-1/8" stroke, 10-ton ram
easily breaks most beads. Replaces Goodyear TO-1600-HA. 10205 kit contains
10105 bead breaker, 10500 pump and 10604 hose assembly. 10213 kits contains
10105 bead breaker, 10508 pump and 10604 hose assembly.
Heavy duty 10-ton
force breaks the toughest beads. Breaks inside head on outside dual farm
tractor tires. Requires just 3" of operating space between dual tractor
tires. No need to remove outside wheel to change tire on outside dual.
Use with 10,000 psi air/hydraulic pump.
10108 - Bead
Push Off Tool
Lightweight tool
for removing combine and tractor tires after breaking the bead. Has a
pushing force of 8,000 lbs. and a 5.5" stroke, a removable handle
for compact storage and uses hydraulic pressure to force the tire off
the rim. The push off tool hooks between the rim and the tire bead. Same
as IMT-150.
10109 - Talon Bead Breaker
OTR Bead Breaker for heavy duty 3 piece rims that replace standard 5 piece rims. Works on both front and back of wheel without dismounting wheel from vehicle. Works on all new 3 piece 25” wheels or larger. Works on all wheels with CAT “Shur-Lok” safety feature. A MUST tool for all tire trucks. Patent Pending
10615 - Conversion Kit for "Combi" Bead Breaker
Clamp will convert
older bead breakers in order to fit new style wheels. Works on all brand
of "Combi" bead breakers.
10607 - Caterpillar Shur-Lok Rim Kit
For use on vehicles with modified Shur-Lok rims. Allows bead breaker to be tightened against a flat surface. Fits all style earth mover bead breakers.
70160 - Manual
Bead Breaker
Loosens tire bead from rims
using leverage. Excellent for working on tires without removing the wheel
from tractors. Will handle 38" and 42", 14-ply farm tractor
and backhoe tires with drop-center rims to small ATV and lawnmower tires.
Operates with ratchet wrench. Do NOT use an impact wrench
